Version: 1.8

Designer configuration

The default Designer configuration is defined in defaultDesignerConfig.conf.

Web interface configuration

Parameter name	Importance	Type	Default value	Description
http.port	High	int	8080	HTTP Port of Designer app
http.interface	High	string	"0.0.0.0"	HTTP interface for Designer app
http.publicPath	Medium	string	""	if Designer used with reverse proxy and custom path, use this configuration to generate links in Designer properly (Designer app is always served from root path)
ssl.enabled	Medium	boolean	false	Should Designer app be served with SSL
ssl.keyStore.location	Medium	string		Keystore file location (required if SSL enabled)
ssl.keyStore.password	Medium	string		Keystore file password (required if SSL enabled)
akka.*	Medium			Akka HTTP is used for HTTP serving, you can configure it in standard way. Below we give Nussknacker-specific defaults
akka.http.server.parsing.max-content-length	Low	int	300000000	Requests (e.g. with test data) can be quite large, so we increase the limit
akka.http.server.request-timeout	Low	duration	1 minute	Consider increasing the value if you have large test data or long savepoint times during deploy

Database configuration

Database is used to store scenario definitions; data processed by Nussknacker are not stored. Currently, Nussknacker supports following databases:

HSQL (embedded), we use syntax_ora option
PostgreSQL

Please check Slick documentation for detailed list of configuration options.

The table below presents most important options, or the ones that have Nussknacker specific defaults.

Parameter name	Importance	Type	Default value	Description
db.url	High	string	"jdbc:hsqldb:file:"${storageDir}"/db;sql.syntax_ora=true"	Default HSQL location
db.driver	High	string	"org.hsqldb.jdbc.JDBCDriver"	"org.postgresql.Driver" in case of PostgreSQL
db.user	High	string	"SA"
db.password	High	string	""
db.connectionTimeout	Low	int	30000
db.maximumPoolSize	Low	int	5	We have lower limits than default config, since then Designer is not heavy-load application
db.minimumIdle	Low	int	1	We have lower limits than default config, since then Designer is not heavy-load application
db.numThreads	Low	int	5	We have lower limits than default config, since then Designer is not heavy-load application

Metrics settings

Metric dashboard

Each scenario can have a link to Grafana dashboard. In Docker setup we provide a sample nussknacker-scenario dashboard. You can modify/configure your own, the only assumption that we make is that variable scenarioName is used to display metrics for particular scenario.

Each scenario type can have different dashboard, this is configured by metricsSettings.scenarioTypeToDashboard settings. If no mapping is configured, metricsSettings.defaultDashboard is used. Actual link for particular scenario is created by replacing

$dashboard with configured dashboard
$scenarioName with scenario name in metricsSettings.url setting.

Parameter name	Importance	Type	Default value	Description
metricsSettings.url	High	string	`/grafana/d/$dashboard?theme=dark&var-scenarioName=$scenarioName&var-env=local` (for Docker setup)	URL (accessible from user browser, in docker setup its configured as relative URL) to Grafana dashboard, see above for details
metricsSettings.defaultDashboard	Medium	string	nussknacker-scenario (for Docker setup)	Default dashboard
metricsSettings.scenarioTypeToDashboard	Low	map		Mapping of scenario types to dashboard

Counts

Counts are based on InfluxDB metrics, stored in nodeCount measurement by default. countsSettings.queryMode setting can be used to choose metric computation algorithm:

OnlySingleDifference - subtracts values between end and beginning of requested range. Fast method, but if restart in the requested time range is detected error is returned. We assume the job was restarted when event counter at the source decreases.
OnlySumOfDifferences - difference is computed by summing differences in measurements for requested time range. This method works a bit better for restart situations, but can be slow for large diagrams and wide time ranges.
SumOfDifferencesForRestarts - if restart is detected, the metrics are computed with OnlySumDifferences, otherwise - with OnlySingleDifferences

If you have custom metrics settings which result in different fields or tags (e.g. you have different telegraf configuration), you can configure required values with the settings presented below:

Parameter name	Importance	Type	Default value	Description
countsSettings.influxUrl	Medium	string		Main InfluxDB query endpoint (e.g. http://influx:8086/query). It should be accessible from Nussknacker Designer server, not from user browser
countsSettings.database	Medium	string
countsSettings.user	Medium	string
countsSettings.password	Medium	string
countsSettings.queryMode	Low	OnlySingleDifference / OnlySumOfDifferences / SumOfDifferencesForRestarts	SumOfDifferencesForRestarts
countsSettings.metricsConfig.sourceCountMetric	Low	string	source_count
countsSettings.metricsConfig.nodeCountMetric	Low	string	nodeCount
countsSettings.metricsConfig.nodeIdTag	Low	string	nodeId
countsSettings.metricsConfig.additionalGroupByTags	Low	list of string	["slot", "instanceId"]
countsSettings.metricsConfig.scenarioTag	Low	string	scenario
countsSettings.metricsConfig.countField	Low	string	count
countsSettings.metricsConfig.envTag	Low	string	env

Deployment settings

Nussknacker Designer can be configured to replace certain values in comments to links that can point e.g. to external issue tracker like GitHub issues or Jira. For example, MARKETING-555 will change to link https://jira.organization.com/jira/browse/MARKETING-555. See development configuration for example configuration.

Parameter name	Importance	Type	Description
commentSettings.substitutionPattern	Low	regexp	Regular expression to look for issue identifier (e.g. `(issues/[0-9]*)` - note use of regexp group)
commentSettings.substitutionLink	Low	string	Link template (e.g. `https://github.com/TouK/nussknacker/$1` - `$1` will be replaced with matched group from `substitutionPattern` config
deploymentCommentSettings.validationPattern	Low	regexp	If deploymentCommentSettings is specified, comment matching validation pattern is required for deployment. Also, if `substitutionPattern` is defined, at least one match is required
deploymentCommentSettings.exampleComment	Low	string	Example of comment which passes validation. Unlike validationPattern field is not mandatory.

Security

Overview

Nussknacker has pluggable security architecture - we support three types of authentication: BasicAuth, OAuth2 and OpenID Connect (OIDC). Configuration specific to each of these three types of authentication mechanism is described in the dedicated sections.

Nussknacker supports roles; the roles permissions are defined in the users configuration file.

Users, roles and permissions

Each user has id and set of permissions for every scenario category. The following permissions are supported:

Read - user can view scenarios in category
Write - user can modify/add new scenarios in category
Deploy - user can deploy or cancel scenarios in given category

You can set a role assigned to an anonymous user with the anonymousUserRole setting in the authentication section in the configuration. When no value is provided (default), no anonymous access will be granted.

Global permissions

In addition to permission system oriented around scenarios categories we provide additional set of permissions. This feature is designed to control access to components that have no category attached, or it doesn't make sense for them to have one.

Currently supported permissions:

AdminTab - shows Admin tab in the UI (right now there are some useful things kept there including search components functionality).

Common configuration parameters

The table below contains parameters common to all the supported authentication methods.

Parameter name	Importance	Type	Description
authentication.method	required	string	`BasicAuth`, `Oidc` or `OAuth2`
authentication.usersFile	required	url or path	URL or path to a file with a mapping of user identities to roles and roles to permissions
authentication.anonymousUserRole	optional	string	Role assigned to an unauthenticated user if the selected authentication provider permits anonymous access. No anonymous access allowed unless a value is provided.

Users' file format:

The association of the users to the roles is in the users' configuration file; in the case of OIDC it can additionally be supplemented by the list of roles provided by the OpenId provider.

If OpenID Connect (OIDC) authentication is used, the information about the user identity is stored in the field sub (subject) of the OIDC token - make sure that these values match.

users: [
  {
    identity: "admin"
    roles: ["Admin"]
  },
  {
    identity: "userWithAdminTab"
    roles: ["User", "UserWithAdminTab"]
  }
  {
    identity: "user"
    roles: ["User"]
  }
]

rules: [
  {
    role: "Admin"
    isAdmin: true,
    categories: ["RequestResponseCategory1"]
  },
  {
    role: "UserWithAdminTab"
    permissions: ["Read", "Write", "Deploy"]
    globalPermissions: ["AdminTab"]
    categories: ["Category2", "RequestResponseCategory1"]
  },
  {
    role: "User"
    permissions: ["Read", "Write"]
    categories: ["Category1", "Category2"]
  }
]

BasicAuth security module

In order to use Basic authentication you just need to set authentication.method to BasicAuth and provide either plain or encrypted passwords for users additionally to the usersFile's content as follows:

users: [
  {
    ...
    password: "pass"
  },
  {
    ...
    encryptedPassword: "$2a$12$oA3U7DXkT5eFkyB8GbtKzuVqxUCU0zDmcueBYV218zO/JFQ9/bzY6"    
  }
]

...

Encrypted hashes

Encryption of passwords uses BCrypt algorithm. You can generate sample hash using command:

python -c 'import bcrypt; print(bcrypt.hashpw("password".encode("utf8"), bcrypt.gensalt(rounds=12, prefix="2a")))'

If you don't have bcrypt installed, use pip install bcrypt.

Be aware that usage of BCrypt hashes will cause significant CPU overhead for processing of each http request, because we don't have sessions and all requests are authenticated. To avoid this overhead you can configure cashing of hashes using configuration:

authentication: {
  method: "BasicAuth"
  usersFile: "conf/users.conf"
  cachingHashes {
    enabled: true
  }
}

This workaround causes that passwords are kept in the memory, and it will introduce risk that someone with access to content of heap will see cached passwords.

OpenID Connect (OIDC) security module

When talking about OAuth2 in the context of authentication, most people probably mean OpenID Connect, an identity layer built on top of it. Nussknacker provides a separate authentication provider for OIDC with simple configuration and provider discovery. The only supported flow is the authorization code flow with client secret.

You can select this authentication method by setting the authentication.method parameter to Oidc

Parameter name	Importance	Type	Default value	Description
authentication.issuer	required	url		OpenID Provider's location
authentication.clientId	required	string		Client identifier valid at the authorization server
authentication.clientSecret	required	string		Secret corresponding to the client identifier at the authorization server
authentication.audience	recommended	string		Required `aud` claim value of an access token that is assumed to be a JWT.
authentication.rolesClaims	recommended	list of string		Name of the field in the ID token which contains list of user roles. This list supplements roles defined in the `usersFile`
authentication.redirectUri	optional	url	inferred from UI's location	Callback URL to which a user is redirected after successful authentication
authentication.scope	optional	string	`openid profile`	Scope parameter's value sent to the authorization endpoint.
authentication.authorizationEndpoint	auxiliary	url or path	discovered	Absolute URL or path relative to `Issuer` overriding the value retrieved from the OpenID Provider
authentication.tokenEndpoint	auxiliary	url or path	discovered	as above
authentication.userinfoEndpoint	auxiliary	url or path	discovered	as above
authentication.jwksUri	auxiliary	url or path	discovered	as above
authentication.tokenCookie.name	auxiliary	string		name of cookie to store access token
authentication.tokenCookie.path	auxiliary	string		path of access token cookie
authentication.tokenCookie.domain	auxiliary	string		domain of access token cookie

Auth0 sample configuration

Assuming ${nussknackerUrl} is the location of your deployment, in your Auth0 tenant settings do the following:

Create a "Regular Web Application" with the "Allowed Callback URL's" field set to ${nussknackerUrl}
Create an "API" with the "Identifier" field preferably set to ${nussknackerUrl}/api
Create an Auth Pipeline Rule with the content:

function (user, context, callback) {
  const assignedRoles = (context.authorization || {}).roles || ['User'];

  let idTokenClaims = context.idToken || {};

  idTokenClaims[`nussknacker:roles`] = assignedRoles;

  context.idToken = idTokenClaims;
  callback(null, user, context);}

You can find more configurations options at Auth0's documentation on applications and APIs

In Nussknacker's configuration file add the following authentication section:

authentication: {
  method: "Oidc"
  issuer: "https://<the value of Applications -> Application Name -> Settings -> Basic Information -> Domain>"
  clientSecret: "<the value of Applications -> Application Name -> Settings -> Basic Information -> Client Secret>"
  clientId: "<the value of Applications -> Application Name -> Settings -> Basic Information -> Client Identifier>"
  audience: "<the value of APIs -> API Name -> Settings -> General Settings -> Identifier>"
  rolesClaims: ["nussknacker:roles"]
  usersFile: "conf/users.conf"
}

The role names in the usersFile should match the roles defined in the Auth0 tenant.

OAuth2 security module

Generic configuration

authentication: {
  method: ${?AUTHENTICATION_METHOD} (default: "BasicAuth")
  usersFile: ${?AUTHENTICATION_USERS_FILE}
  authorizeUri: ${?OAUTH2_AUTHORIZE_URI}
  clientSecret: ${?OAUTH2_CLIENT_SECRET}
  clientId: ${?OAUTH2_CLIENT_ID}
  profileUri: ${?OAUTH2_PROFILE_URI}
  profileFormat: ${?OAUTH2_PROFILE_FORMAT}
  accessTokenUri: ${?OAUTH2_ACCESS_TOKEN_URI}
  redirectUri: ${?OAUTH2_REDIRECT_URI}
  implicitGrantEnabled: ${?OAUTH2_IMPLICIT_GRANT_ENABLED}
  jwt {
    accessTokenIsJwt: ${?OAUTH2_ACCESS_TOKEN_IS_JWT} (default: false)
    userinfoFromIdToken: ${?OAUTH2_USERINFO_FROM_ID_TOKEN} (default: false)
    audience: ${?OAUTH2_JWT_AUDIENCE}
    publicKey: ${?OAUTH2_JWT_AUTH_SERVER_PUBLIC_KEY}
    publicKeyFile: ${?OAUTH2_JWT_AUTH_SERVER_PUBLIC_KEY_FILE}
    certificate: ${?OAUTH2_JWT_AUTH_SERVER_CERTIFICATE}
    certificateFile: ${?OAUTH2_JWT_AUTH_SERVER_CERTIFICATE_FILE}
    idTokenNonceVerificationRequired: ${?OAUTH2_JWT_ID_TOKEN_NONCE_VERIFICATION_REQUIRED}
  }
  accessTokenParams {
    grant_type: ${?OAUTH2_GRANT_TYPE}
  }
  authorizeParams {
    response_type: ${?OAUTH2_RESPONSE_TYPE}
    scope: ${?OAUTH2_SCOPE}
    audience: ${?OAUTH2_AUDIENCE}
  }
  headers {
    Accept: ${?AUTHENTICATION_HEADERS_ACCEPT}
  }
  authorizationHeader: "Authorization" (default)
  accessTokenRequestContentType: "application/json" (default)
  defaultTokenExpirationDuration: "1 hour" (default)
  anonymousUserRole: None (default)
  tokenCookie: None (default)
}

When method is set to OAuth2, the following fields are mandatory: clientSecret, clientId, authorizeUri , redirectUri, accessTokenUri, profileUri, profileFormat, implicitGrantEnabled, usersFile.

For the profileFormat one of oidc or github is supported by default.

Subconfigs accessTokenParams, accessTokenRequestContentType, authorizeParams, headers are optional and every field from any of the subconfigs is optional and could be provided separately.

By default, access token request is sent using application/json content type, to change it (e.g. to application/x-www-form-urlencoded) use accessTokenRequestContentType config.

Subconfig jwt is also optional. However, if it is present and enabled is set to true, the audience and one of the publicKey, publicKeyFile, certificate, certificateFile, fields have to be provided.

Access tokens are introspected only once and then stored in a cache for the expiration time. When using JWT, an incoming access token is validated against its signature and aud(audience) claim. Otherwise, a token is considered valid when it allows a profileUri (e.g. /userinfo) query. No token refreshing nor revoking is implemented.

Remarks:

Setting jwt.idTokenNonceVerificationRequired to true has an effect only if implicitGrantEnabled is also set to true.
For security reasons, if implicit flow used, implicitGrantEnabled and jwt.idTokenNonceVerificationRequired should be set to true. Furthermore authorizeParams.response_type should be set to "access_token id_token" (not only "access_token"). Then a received access_token format has to be JWT (like id_token).

Of course, this does not apply when authorizeParams.response_type is set to code (code flow used).
Provided jwt is enabled, the backend first checks whether a user profile can be obtained from the access_token, secondly it tries to obtain the profile from a request sent to authorizeUri.
Access token can be configured to be set in http-only cookie (e.g. for enabling proxy grafana authentication). This is disabled by default, it can be enabled with following config:

  authentication {
  ...
    tokenCookie {
      name: "cookieName"
      path: "/grafana"  //optional
      domain: "mydomain.com"  //optional
    }
  }

OAuth2 security module - GitHub example with code flow

Configuration example:

authentication: {
  method: "OAuth2"
  clientSecret: ""
  clientId: ""
  authorizeUri: "https://github.com/login/oauth/authorize"
  redirectUri: "http://localhost:3000"
  accessTokenUri: "https://github.com/login/oauth/access_token"
  profileUri: "https://api.github.com/user"
  profileFormat: "github"
  implicitGrantEnabled: false
  accessTokenParams {
    grant_type: "authorization_code"
  }
  headers {
    Accept: "application/json"
  }
  authorizeParams {
    response_type: "code"
  }
  usersFile: "./src/test/resources/oauth2-users.conf"
}

Users file example:

users: [ //Special settings by user email
  {
    identity: "some@email.com"
    roles: ["Admin"]
  }
]

rules: [
  {
    role: "Admin"
    isAdmin: true
  },
  {
    role: "User" //this is default role for all users
    permissions: ["Read", "Write", "Deploy"]
    categories: ["Default", "FraudDetection"]
  }
]

UI customization options

Toolbars and buttons at process window are configurable, you can configure params:

uuid - optional uuid identifier which determines unique code for FE localstorage cache, default: null - we generate uuid from hashcode config
topLeft - optional top left panel, default: empty list
bottomLeft - optional bottom left panel, default: empty list
topRight - optional top right panel, default: empty list
bottomRight - optional bottom right panel, default: empty list

Example configuration:

processToolbarConfig {
  defaultConfig {
    topLeft: [
      { type: "tips-panel" }
    ]
    topRight: [
      {
        type: "process-info-panel"
        buttons: [
          { type: "process-save", disabled: { subprocess: false, archived: true, type: "oneof" } }
          { type: "custom-link", title: "Metrics for $processName", url: "/metrics/$processId" }
        ]
      }
    ]
  }
}

We can also create special configuration for each category by:

processToolbarConfig {
  categoryConfig {
   "CategoryName" {
        id: "58f1acff-d864-4d66-9f86-0fa7319f7043"
        topLeft: [
          { type: "creator-panel", hidden: {subprocess: true, archived: false, type: "allof"} }
        ]
    } 
  }
}

Configuration allow us to:

hiding panels
hiding or disabling buttons

Each of this function can be configured by condition expression where we can use three parameters:

subprocess: boolean - if true then condition match only subprocess, by default ignored
archived: boolean - if true then condition match only archived, by default ignored
type: allof / oneof - information about that checked will be only one condition or all conditions

Configuration allows to templating params like:

name - available only on Buttons
title- available on Panels and Buttons
url - available only on CustomLink and CustomAction buttons
icon- available only on Buttons

Right now we allow to template two elements:

scenario id -$processId
scenario name - $processName

Example usage:

title: "Metrics for $processName"
name: "deploy $processName"
url: "/metrics/$processId"
icon: "/assets/process-icon-$processId"

Default Process Panel Configuration

processToolbarConfig {
  defaultConfig {
    topLeft: [
      { type: "tips-panel" }
      { type: "creator-panel", hidden: { archived: true } }
      { type: "versions-panel" }
      { type: "comments-panel" }
      { type: "attachments-panel" }
    ]
    topRight: [
      {
        type: "process-info-panel"
        buttons: [
          { type: "process-save", title: "Save changes", disabled: { archived: true } }
          { type: "process-deploy", disabled: { subprocess: true, archived: true, type: "oneof" } }
          { type: "process-cancel", disabled: { subprocess: true, archived: true, type: "oneof" } }
          { type: "custom-link", name: "metrics", icon: "/assets/buttons/metrics.svg", url: "/metrics/$processName", disabled: { subprocess: true } }
        ]
      }
      {
        id: "view-panel"
        type: "buttons-panel"
        title: "view"
        buttons: [
          { type: "view-zoom-in" }
          { type: "view-zoom-out" }
          { type: "view-reset" }
        ]
      }
      {
        id: "edit-panel"
        type: "buttons-panel"
        title: "edit"
        hidden: { archived: true }
        buttonsVariant: "small"
        buttons: [
          { type: "edit-undo" }
          { type: "edit-redo" }
          { type: "edit-copy" }
          { type: "edit-paste" }
          { type: "edit-delete" }
          { type: "edit-layout" }
        ]
      }
      {
        id: "process-panel"
        type: "buttons-panel"
        title: "process"
        buttons: [
          { type: "process-properties", hidden: { subprocess: true } }
          { type: "process-compare" }
          { type: "process-migrate", disabled: { archived: true } }
          { type: "process-import", disabled: { archived: true } }
          { type: "process-json" }
          { type: "process-pdf" }
          { type: "process-archive", hidden: { archived: true } }
          { type: "process-unarchive", hidden: { archived: false } }
        ]
      }
      {
        id: "test-panel"
        type: "buttons-panel"
        title: "test"
        hidden: { subprocess: true }
        buttons: [
          { type: "test-from-file", disabled: { archived: true } }
          { type: "test-generate", disabled: { archived: true } }
          { type: "test-counts" }
          { type: "test-hide" }
        ]
      }
      {
        id: "group-panel"
        type: "buttons-panel"
        title: "group"
        hidden: { archived: true }
        buttons: [
          { type: "group" }
          { type: "ungroup" }
        ]
      }
    ]
  }
}

Tabs (in main menu bar, such as Scenarios etc.) can be configured in the following way:

 tabs: ${tabs} [
  {
    id: "kibana",
    title: "Kibana",
    url: "https://myKibana.org/kibana",
    type: "IFrame",
    requiredPermission: "AdminTab"
  }
]

By default, only Scenarios tab is configured.

Parameter name	Type	Description
id	string	Unique identifier
title	string	Title appearing in UI
type	IFrame/Local/Remote/Url	Type of tab (see below for explanation)
url	string	URL of the tab
requiredPermission	string	Optional parameter, name of Global Permission
addAccessTokenInQueryParam	boolean	Optional parameter, when true add accessToken (if OAuth2 authentication is used) to iframe query params

The types of tabs can be as follows (see dev-application.conf for some examples):

IFrame - contents of the url parameter will be embedded as IFrame
Local - redirect to Designer page (/admin, /processes etc., see code for other options)
Remote - module federation can be used to embed external tabs, url should be in form: {module}/{path}@{host}/{remoteEntry}.js
Url - redirect to external page/url

Environment configuration

Nussknacker installation may consist of more than one environment. Typical example is a configuration, where you have:

environment for testing scenarios, which mirrors production data (e.g. via Kafka mirror-maker), but contains only scenarios that are currently worked on
production environment

You can configure secondaryEnvironment to allow for

easy migration of scenarios
comparing scenarios between environments
testing (currently only via REST API) if all scenarios from secondary environment are valid with model configuration from this environment (useful for testing configuration etc.) Currently, you can only configure secondary environment if it uses BASIC authentication - technical user is needed to access REST API.

Parameter name	Importance	Type	Default value	Description
environment	Medium	string		Used mainly for metrics configuration. Please note: it has to be consistent with tag configuration of metrics
environmentAlert.content	Low	string		Human readable name of environment, to display in UI
environmentAlert.color	Low	indicator-green / indicator-blue / indicator-yellow / indicator-red		Color of environment indicator
secondaryEnvironment.remoteConfig.uri	Medium	string		URL of Nussknacker REST API e.g. `http://secondary.host:8080/api`
secondaryEnvironment.remoteConfig.batchSize	Low	int	10	For testing compatibility we have to load all scenarios, we do it in batches to optimize
secondaryEnvironment.user	Medium	string		User that should be used for migration/comparison
secondaryEnvironment.password	Medium	string		Password of the user that should be used for migration/comparison
secondaryEnvironment.targetEnvironmentId	Low	string		Name of the secondary environment (used mainly for messages for user)

Testing

Parameter name	Importance	Type	Default value	Description
testDataSettings.maxSampleCount	Medium	int	20	Limits number of samples for tests from file
testDataSettings.testDataMaxLength	Low	int	200000	Limits size (in characters) of test input for tests from file
testDataSettings.resultsMaxBytes	Low	int	50000000	Limits size of returned test data for tests from file

Other configuration options

Parameter name	Importance	Type	Default value	Description
attachments.maxSizeInBytes	Medium	long	10485760	Limits max size of scenario attachment, by default to 10mb
analytics.engine	Low	Matomo		Currently only available analytics engine is Matomo
analytics.url	Low	string		URL of Matomo server
analytics.siteId	Low	string		Site id
intervalTimeSettings.processes	Low	int	20000	How often frontend reloads scenario list
intervalTimeSettings.healthCheck	Low	int	30000	How often frontend reloads checks scenarios states
developmentMode	Medium	boolean	false	For development mode we disable some security features like CORS. Don't use in production
enableConfigEndpoint	Medium	boolean	false	Expose config over http (GET /api/app/config/) - requires admin permission. Please mind, that config often contains password or other confidential data - this feature is meant to be used only on 'non-prod' envrionments.
redirectAfterArchive	Low	boolean	true	Redirect to scenarios list after archive operation.
usageStatisticsReports.enabled	Low	boolean	true	When enabled browser will send anonymous usage statistics reports to `stats.nussknacker.io`

Scenario type, categories

Every scenario has to belong to a group called category. For example, in one Nussknacker installation you can have scenarios detecting frauds, and those implementing marketing campaigns. Category configuration looks like this:

categoriesConfig: {
  "marketing": "streaming",
  "fraud": "streaming",
}

For each category you have to define its scenario type (streaming in examples above). Scenario type configuration consists of two parts:

deploymentConfig - deployment manager configuration
modelConfig - model configuration

In Nussknacker distribution there are preconfigured scenario types:

streaming - using Flink Deployment Manager providing both stateful and stateless streaming components
streaming-lite-embedded - using embedded Lite Deployment Manager in Streaming processing mode providing only stateless streaming components
request-response-embedded - use embedded Request-Response Deployment Manager, scenario logic is exposed as REST API, on additional HTTP port at Designer

And one Default category using streaming by default (can be configured via DEFAULT_SCENARIO_TYPE environment variable)

See example from development config for more complex examples.

Designer configuration

Web interface configuration​

Database configuration​

Metrics settings​

Metric dashboard​

Counts​

Deployment settings​

Security​

Overview​

Users, roles and permissions​

Global permissions​

Common configuration parameters​

Users' file format:​

BasicAuth security module​

Encrypted hashes​

OpenID Connect (OIDC) security module​

Auth0 sample configuration​

OAuth2 security module​

Generic configuration​

Remarks:​

OAuth2 security module - GitHub example with code flow​

Configuration example:​

Users file example:​

UI customization options​

Process Toolbar Configuration​

Toolbar Panel Conditioning​

Toolbar Panel Templating​

Default Process Panel Configuration​

Main menu configuration​

Environment configuration​

Testing​

Other configuration options​

Scenario type, categories​